This project takes a freeform pattern using loop spirals, loops, and curves, and decorates the inside of a plain cuff frame. You can get the most sensuous curves by holding the 16g wire with pliers in one hand, and pulling and twisting it into shapes with the other hand, rather than wrapping it around the pliers.
Required Materials: 14-gauge wire, 16-gauge wire, 22-gauge wire. See project for complete list.
Tools Needed: Flush cutters, chain-nose pliers, hammer, bench block, bracelet mandrel, ruler, sharpie. See project for complete list.
Techniques Used: Wire working.
Originally Published: Step by Step Wire Jewelry Fall 2009