The GO! Baby Love Starter Set includes:
- GO! Baby Fabric Cutter
- GO! Baby Fabric Cutter Tote Bag
Most GO! Dies will Work with your GO! Baby Fabric Cutter
Die compatibility information is listed on all GO! die product pages. To shop for Baby-compatible dies, see the GO! Baby Dies category within the GO! Shop. The GO! Baby Fabric Cutter does not work with 10" x 10" or 10" x 24" GO! dies.
Place die on cutter FOAM SIDE UP. Place Fabric on top of die.* Place cutting mat on top of fabric.
Push die, fabric and mat firmly against roller. Turn handle in direction you want the die to go.
Remove mat, die-cut shape and excess fabric. Add new fabric and cutting mat on top of die. Repeat process from opposite side. No need to handle die between cuts.
*To conserve fabric, cover only the shape you want to cut--not the entire die board. For asymmetrical shapes, place fabric pattern side up if you want the shape to look exactly like the shape on the die. Place fabric pattern side down if you want the shape to be a mirror image of the shape on the die.
GO! Baby Fabric Chart: Chart below is the recommend number of fabric layers; actual number of fabric layers will vary depending on fabric type and thickness.
Care & Maintenance: For best results, always keep your GO! Baby cutter clean and lint free. To clean the cutter inside and out, use a soft dry cloth. Avoid abrasives, solvents and spray cleaners. If necessary, wipe with a damp cloth, then polish with a dry cloth. Use canned air to clear lint from roller area. The GO! Baby fabric cutter does not have replacement parts.
Limited One-Year Warranty: We promise your personal AccuQuilt GO! Baby cutter will be free from defects in material or workmanship when used as directed. If you experience a manufacturing defect within one year after purchase, AccuQuilt will repair or replace the cutter at no charge. Improper use, excessive wear and tear caused by commercial use and/or damage caused by the user will void the warranty. This warranty covers only the cutting unit--not mats or dies. To receive a replacement unit, return the cutter to the place you purchased it.